按手册导入mib,但导入文件必须是*.CustomMIBPollers,而第三方的MIB都以*.mib为格式的文件,,,,导入不成功,,请成功者释疑,,感谢.
我是在8.5版本下出现这问题的.
在导入文件时有下面几个文件:
SolarWindsFanAndPowerSupply.CustomMIBPollers
SolarWindsSNMP.CustomMIBPollers
SolarWindsTemperature.CustomMIBPollers
英文手册:
Importing Custom MIB Pollers
SolarWinds provides the ability to import custom MIB pollers into Orion Network
Performance Monitor. You can not, however, import MIBs directly into the Orion
MIB database. This import mechanism allows you to import the association of a
MIB with a poller. The custom MIB poller can then be associated with a node or
interface within your environment. Use the following procedure to import a
custom MIB poller.
To import a custom MIB poller:
1. Click Start > All Programs > SolarWinds Orion > System Manager.
2. Click File > Custom MIB Pollers.
3. Click Import.
4. Navigate to the poller file that you want to import, and then click Open.
5. If you want to add additional pollers, click Open, navigate to the poller file
that you want to import, and then click Open.
6. Select the custom MIB pollers that you want to add from the list on the left,
and then click Import.
Notes:
• Select multiple pollers by using Shift+click and Ctrl+click.
• To collapse all folders and see just the group names, Shift+click the “-
“ next to any of the group names.
7. Click OK.
8. Assign nodes or interfaces to the imported poller. For more information, see
“Assigning Nodes or Interfaces to a Custom MIB Poller” on page 154.
9. Select your new, imported custom poller.
10. If the State value in the status field is not Enabled, click Edit, check
Enabled, and then click Finish.
As soon as the custom MIB poller has been enabled and nodes or interfaces
have been assigned, the poller will begin collecting statistics. To view these
statistics, log in to the Orion Network Performance Monitor Web Console and
browse to a node or interface that was just assigned to the poller. For more
information,
[ 本帖最后由 mzwindy 于 2007-12-3 15:21 编辑 ]
