Orion SLX 7.8监测不了华为，思科的当前流量？高手帮忙
我现在装的版本是orion network performance monitor 7.8 slx,装上后，监测不到我的华为路由器的物理口的当前流量，我有一台思科2611路由器，orion network performance monitor 7.8 slx可以监测到此思科路由器的CPU及MEMORY的利用率，也监测不到物理口的当前流量？各位大侠遇到过这种问题吗？但是我用Solarwinds 2002 CATV Engineers Edition 5.0用BandWidth Montor就能看到华为和思科的所有物理口的当前流量（带宽）。我把我思科设备的路由器配置现在告诉大家 ，大家给看看是啥问题。
baizhiwan#show config
Using 3081 out of 29688 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname baizhiwan
!
enable secret 5 $1$zLOM$qIsQctdMElCbeqq4Zj
enable password *****
!
ip subnet-zero
!
!
no ip dhcp conflict logging
ip dhcp excluded-address 192.168.1.10
!
ip dhcp pool baizhiwan
network 192.168.1.0 255.255.255.0
dns-server 202.99.8.1 211.94.69.34
default-router 192.168.1.10
!
!
!
!
interface FastEthernet0/0
ip address ********** 255.255.255.252
ip access-group 110 in
ip accounting output-packets
ip nat outside
duplex auto
speed auto
!
interface Serial0/0
ip address 210.82.94.45 255.255.255.252
shutdown
!
interface FastEthernet0/1
ip address************* 255.255.255.248 secondary//外网地址
ip address ************* 255.255.255.248 secondary
ip address 192.168.255.3 255.255.255.0 secondary
ip address 192.168.2.1 255.255.255.0 secondary
ip address 192.168.1.10 255.255.255.0
ip access-group 110 out
ip nat inside
duplex auto
speed auto
!
interface Virtual-Template200
no ip address
!
ip nat translation tcp-timeout 3600
ip nat pool baizhiwan 218.249.75.72 218.249.75.79 netmask 255.255.255.240
ip nat pool baizhiwan2 218.249.75.64 218.249.75.71 netmask 255.255.255.240
ip nat inside source list 1 pool baizhiwan2 overload
ip classless
ip route 0.0.0.0 0.0.0.0 172.30.77.*************
no ip http server
ip pim bidir-enable
!
!
access-list 1 permit 192.168.0.0 0.0.255.255
access-list 110 deny tcp any any eq 4444
access-list 110 deny udp any any eq tftp
access-list 110 deny tcp any any eq 135
access-list 110 deny udp any any eq 135
access-list 110 deny tcp any any eq 139
access-list 110 deny tcp any any eq 445
access-list 110 deny udp any any eq 445
access-list 110 deny tcp any any eq 593
access-list 110 deny udp any any eq 593
access-list 110 deny udp any any eq 1434
access-list 110 deny tcp any host 218.92.50.23
access-list 110 deny tcp any host 222.191.251.195
access-list 110 deny tcp any host 221.238.193.5
access-list 110 deny tcp any host 172.211.74.93
access-list 110 deny tcp any any eq 18890
access-list 110 deny udp any any eq 18890
access-list 110 deny tcp any any eq 25054
access-list 110 deny udp any any eq 25054
access-list 110 deny tcp any host 192.168.8.4
access-list 110 permit ip any any
snmp-server community router RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps isdn ietf
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps ipmulticast
snmp-server enable traps msdp
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps rtr
snmp-server enable traps syslog
!
line con 0
line aux 0
line vty 0 4
password 123
login
!
!
end
baizhiwan# 奇怪我的可以呀
你后面那么多SNMP奇奇怪怪能够解释下吗！
只看懂了：snmp-server community router RO snmp-server enable traps是定义那些事件和协议将出发snmptrap.
页:
[1]